home *** CD-ROM | disk | FTP | other *** search
-
- If you are new to LAN-LINK, don't be scared off by the size of
- the program and the manual. LAN-LINK is built in a top down
- structured manner. You can go into it as deep as you need. Begin
- by using the QUICK MENU which gives you the most commonly used
- features in one menu. Then, as you become familiar with LAN-LINK,
- start to explore the other menus.
-
- Before you operate for the first time, bring up LAN-LINK and use
- the options in the Parameter Menu to configure LAN-LINK to your
- station and way of operating. AS A MINIMUM, CHANGE THE
- CALLSIGNS. Read SECTION 2 first and then later Section 18 of the
- documentation to see what the customization is capable of.
- Update/Save the configuration file when finished.
-
- LAN-LINK uses HARDWARE Handshaking between the PC and the TNC,
- you must have the cable wired correctly. A cable with three
- signal wires will not work correctly. If you insist on using a 3
- wire cable, you must set the DCD Flag (in the Parameter Menu) to
- OFF.
-
- LAN-LINK FILES
-
- LAN-LINK.EXE The program, run it.
- LAN-LINK.DOC The Documentation file.
- KAM.SYS Configuration file for KAM.
- KPC.SYS Configuration file for KPC-2.
- LAN-LINK.SYS Configuration file (default )for PK232.
- MFJ1278.SYS Configuration file for MFJ1278.
- TNC1.SYS Configuration file for TNC1.
- TNC2.SYS Configuration file for TNC2.
- YAPP CNF Configuration file for YAPP (use in YAPP).
- APPNOTES.001 LAN-LINK Application Note on Working SAREX
- APPNOTES.002 LAN-LINK Application Note on Connecting to others
- APPNOTES.003 LAN-LINK Application Note on Flow Control
- BEGINNER.BBS Reprint of an article describing the features on, and
- how to use a packet BBS.
- PCZ.ZIP Zipped Public Domain Zmodem protocols for use with the
- QZ*.BAT files.
- QZ*.BAT Batch files which LAN-LINK will use for Zmodem Binary
- File transfers.
-
- If you don't have a PK232, rename LAN-LINK.SYS to PK232.SYS, then
- rename your TNC.SYS file to LAN-LINK.SYS and configure it.
-
- For example, if you are using a KAM,
- rename LAN-LINK.SYS to PK232.SYS, then
- rename KAM.SYS to LAN-LINK.SYS.
-
- LAN-LINK will run unconfigured, but please configure the
- callsigns at least.
-
- Print or view the documenation file to find out more about LAN-
- LINK.
-
- READ THE DOCUMENTATION FILE.
-
- Update Notes
-
- If you are UPDATING from an earlier than 1.58 version of LAN-LINK
- or any PK232COM, the Configuration files are not compatible to
- that needed for 1.58. You must use the Configuration file(s)
- supplied on this disk.
-
- If you are updgrading from 1.58, you can use your old config-
- uration file, ignore the error message when you bring it up for
- the first time, and Update the file (Parameter menu, U option).
-
- LAN-LINK 1.59 Registration Fee $35.00
- PC-HAM 3.52 Registration Fee $36.50
- WHATS-UP 1.00 Registration Fee $35.00
-
- Special discount, $95.00 if all packages are registered at the
- same time.
-
- Evaluation Copies $5.00 per package, $10.00 for the set.
-
- To: Joe Kasser G3ZCZ
- P O BOX 3419
- SILVER SPRING
- MD 20918.
-
- CALL ________________ TODAY'S DATE _____________
-
- NAME ______________________________________________
-
- ADDRESS ___________________________________________
-
- ___________________________________________
-
- CITY ___________________________Telephone (___)____-____
-
- STATE _________ POSTCODE ______________________
-
- TNC TYPE _____________________ Home BBS __________
-
- I enclose a check for ______. Please send me the latest version
- of ______________, and register me as a user. I am currently
- using version _____ which I obtained from _____________________.
-
- I enclose a disks/sase or $5.00. ($10.00 for all programs).
- Please send me the latest version of ______________________ to
- evaluate. If I like it and use it, I plan to become a registered
- user.
-
- Disk Size 5.25 ______ 3.5 ______
-
- Signature
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 3